Get creative this spring and make your very own laser cut plant propagation station! Learn how to make your own with this easy-to-follow guide and download the template for free.
Set up laser cutter by placing the plywood on the laser bed and connecting it to a computer. In my case, I used my xTool M1.
1 sheet 3mm Plywood
Load the Propagation Station Pattern
Download the free pattern
Open the files in xTool Creative Space and drag onto the basswood. In case the settings didn't load, these are the settings to use:Material: 3mm Basswood PlywoodThickness: 3mmHeight Raised: Triangular prismCut: Power=100%, Speed=5, Pass=1
Check the framing and then start the laser cut. Stay nearby in case there are any issues!
Once cutting is complete, remove the pieces from laser bed and poke out the holes.
Assemble the Propagation Station
Add the sides and back to the base.
Attach the top. You can use a rubber hammer to secure everything.
Insert the vase into the propagation station by lifting it up and sliding it back in before lowering.
1 Bulb Vase
Add water and clippings and enjoy!
Water, Plant Clippings
Keyword Basswood, Home Decor, Laser Cutter, Plants, Plywood, xTool