Alice in Wonderland Disney Ears
Make your own Alice in Wonderland Disney ears using a fun fabric print. These no-sew Mickey ears would certainly make the Mad Hatter proud!
Materials
- 2 90mm Clear Plastic Disc Ornaments
- 1 set 6.6 ft Fairy Lights
- Alice in Wonderland Fabric
- Black Sequin Fabric
- 1 1 inch Satin Headband
- Satin Ribbon
Equipment
- Glue gun
- Scissors
- Disney Ears Template
Instructions
Prepare the Ears
- Break off the top part of each side of the plastic ornaments.
- Glue 10 lights into one of the halves of an ornament. The last light should be added close to the opening.
- Fold the fabric in half and place the Disney Ear Template on top. Use scissors or a rotary cutter to cut it. Repeat so you have four circles.
- Glue the fabric onto the sides of the plastic ornaments.After glueing each circle, trim away the excess to keep it neat.
Prepare the Headband
- Fold the fabric in half and cut around the headband template from the Disney Ear Template along the fold.Glue the sides of the fabric to the inside of the headband.
- Cut the ribbon an inch or two longer than the length of the headband. Glue it to the inside.
Attach the Ears
- Space the covered ears on top of the headband and glue them to the headband.
- Wrap up the wires and glue them to the top of the headband. Then glue the battery pack on top, off to one side to leave room for the bow.
Finish the Ears
- Cut two rectangles of the black sequin fabric - one that is 8×11 inches and a small strip that’s around 3×1 inch.Fold the the larger rectangle into the main part of the bow. Then use the small strip to create the ribbon around the bow. The full steps can be found on the main post to make the classic Light Up Minnie Mouse Ears.
- Then glue the finished bow in front of the battery pack on top of the headband.
Notes
Download the free Minnie Mouse ears template to easily cut the fabric and make the headband.